自动驾驶

This paper proposes a constant time-delay trajectory tracking method for vehicle convoys operating without inter-vehicle communication, a common coordinate system, or global positioning. The method integrates a probabilistic sequence-to-sequence (Seq2Seq) neural network with an invariant extended Kalman filter (IEKF) to warm-start the prediction process, allowing accurate estimation of a leader vehicle's relative trajectory on the SE(2) manifold. A geometric model predictive controller is further incorporated to fully exploit the manifold-based trajectory predictions for improved control performance. The system can handle arbitrary nonlinear trajectories with varying speeds and motion profiles while reducing the need for expert-based domain knowledge for the design of trajectory following systems, even under long trajectory delays. The effectiveness of the method is validated through comparisons with a pure IEKF baseline, learning-based methods, and the ground-truth trajectory in kinematic simulations, as well as in experiments using real robotic vehicles.

Unmanned ground vehicles (UGVs) operating in off-road scenarios are confronted with complex terrain disturbances that can substantially degrade path tracking performance. To address this challenge, this paper proposes a deep neural network (DNN) Koopman-based deviation compensation strategy for UGV path tracking control. Firstly, based on the vehicle dynamic function on coupled slope, an adaptive forgetting recursive least squares method with decoupled error terms is designed to estimate tire cornering stiffness. On this basis, a Laguerre model predictive control (LMPC) path tracking control strategy is designed by incorporating Laguerre functions, which can reduce computational resource usage while maintaining reliable tracking performance across different coupled slope scenarios. Then, by integrating Koopman operator theory with DNN, a DNN Koopman (DK) path deviation compensation method is proposed, which significantly improves the path tracking accuracy of UGV under potholed road disturbances. Furthermore, an event-triggered parallel cooperative (EPC) compensation mechanism that couples LMPC with DK is established based on compensation activation criteria and credibility verification. This mechanism improves path tracking accuracy on potholed road while ensuring the feasibility of overall steering command and stability of vehicle after DK compensation. Finally, a hardware-in-the-loop (HiL) experimental platform is constructed for validation. Experimental results demonstrate that the proposed UGV path tracking strategy improves tracking performance by more than 11.5% across multiple operating conditions.

Load transportation with quadruped robots is strongly affected by the dynamics of the physical interface between the robot and the load. Passive spring-based arms reduce weight and complexity compared to active manipulators, but their spring-damper dynamics can introduce oscillatory forces that degrade locomotion stability. This paper derives an extended Zero Moment Point (ZMP) formulation that includes passive payload-interface dynamics, relating stiffness, damping, and payload mass to the stability margin. The analysis shows that underdamped configurations can resonate with locomotion harmonics. Based on this insight, we augment a Single Rigid Body Dynamics model with passive subsystem dynamics and integrate it into a Model Predictive Control framework. In simulation, the proposed controller reduces stability violations by up to $10\times$, from $7.0\%$ to $0.7\%$, and increase locomotion efficiency by lowering horizontal ground reaction force effort by up to $15\%$ compared to a nominal baseline. Hardware experiments with a $2\,\mathrm{kg}$ payload show stable locomotion under pull-release disturbances where the nominal controller fails. The same model also enables end-effector tracking through passive arm dynamics without direct arm actuation.

Multi-agent task planning in cluttered, dynamic environments requires assigning tasks to agents while simultaneously determining safe, time-efficient trajectories through the environment. When tasks are dynamic, such as rendezvous objectives, allocation decisions depend not only on which agent is best suited for a task, but also on when and where that task can be reached. This paper presents a solution to this problem, which combines Graphs of Convex Sets (GCS) for trajectory optimization with the Consensus-Based Bundle Algorithm (CBBA) for distributed task allocation. In our approach, GCS finds optimal trajectories through dynamic environments using a time-extended (3D+time) configuration space. At the same time, CBBA coordinates task assignments across agents, enabling informed decision-making in a moving environment. We then connect allocation and planning to allow the agents to avoid collisions in the 3D+time configuration space and provide accurate time estimates for task completion. We demonstrate the effectiveness of our approach in simulated cluttered environments with static and dynamic tasks.