Contact-rich manipulation requires force sensitivity, but many robot arms lack dedicated force sensors due to their high cost. We present Neural External Torque Estimation (NEXT), a data-driven method that estimates external joint torques without needing any dedicated force sensors. NEXT trains in 1 minute from only 10 minutes of free-motion data, yet achieves estimates comparable to dedicated joint-torque sensors. NEXT enables force-feedback teleoperation on low-cost arms and improves policy learning through Force-Informed Re-Sampling Training (FIRST), which up-samples pre-contact and contact segments during behavior cloning. Across five long-horizon tasks, FIRST outperforms prior force-aware policies by over 17% in task progress. Together, NEXT and FIRST bring force-aware teleoperation and policy learning to off-the-shelf robots without additional sensing hardware. Video results and code are available at this https URL

Accurate identification of hydrodynamic derivatives is essential for control and navigation of Unmanned Surface Vehicles (USVs), but high-fidelity manoeuvring data from physical sea trials are constrained by cost and safety. Turning Circle (TC) and Zig-Zag (ZZ) trials remain fundamental to IMO and ITTC assessment procedures. This paper extends the Marine Robotics Unity Simulator (MARUS) by introducing a standardised Virtual Sea Trial framework for automated execution and data generation of TC/ZZ manoeuvres, with traceable command-actuation logging, system-identification (SI)-focused data conditioning, and automated extraction of IMO/ITTC-aligned manoeuvring metrics. A key contribution is a dedicated TC/ZZ data acquisition and post-processing pipeline, improving the repeatability and auditability of simulator-based manoeuvres while producing SI-ready datasets for hydrodynamic-derivative identification and digital-twin workflows. Another feature is explicit command-execution separation for differential-thrust steering, where inputs are recorded as ordered rudder-equivalent commands and realised actuation is logged as an execution-level proxy derived from applied thrust. Case-study results demonstrate repeatable and compliant manoeuvre behaviour. For TC tests, the normalised advance differs by approximately 3.9 percent between port and starboard sides, while the tactical diameter differs by approximately 4.6 to 4.7 percent. For ZZ tests, first and second overshoot excesses remain below 1 degree for both +/- 10 degree and +/- 20 degree manoeuvres, satisfying IMO criteria, while peak yaw rates range from approximately 4.1 to 5.8 deg/s. Overall, the framework provides a repeatable and auditable virtual sea-trial workflow for generating IMO/ITTC-aligned datasets and supporting system identification, hydrodynamic-derivative estimation, and digital-twin calibration.

We develop a large-signal stability analysis for a sampled-data, optimization-based secondary controller for inverter-interfaced distributed energy resources in virtual power plants.

STFT-based speech enhancement typically adopts overlapping analysis frames. While overlap is essential for stable STFT processing, it makes adjacent frames highly correlated, causing redundant computation in lightweight models. We propose Half-frame-rate Adaptive Learnable Operator (HALO), a causal plug-in module that halves the internal frame rate without altering the STFT procedure. Broadly applicable to many lightweight models, HALO applies adaptive rate reduction before the backbone and restoration afterward, reconstructing the full-rate spectrum on the original STFT grid. Both reduction and restoration are implemented with lightweight dynamic convolutions. By halving the processed frame rate, HALO reduces backbone compute cost with no added algorithmic latency, freeing budget for channel widening. Experiments on the DNS3 dataset show consistent gains across diverse lightweight models under matched complexity, demonstrating the effectiveness of reducing overlap-induced redundancy.

This note is a tutorial on the deterministic version of the Kalman filter (state estimator), which is formulated as finding the state trajectory consistent with the system's equations with the minimal amount of $L^2$ process and measurement uncertainty. As stated, this is an input signal design problem with linear dynamics and an objective that is affine-quadratic in the state and inputs. The first step is to convert this problem to one with a purely quadratic objective by embedding in a larger system using ``homogeneous coordinates''. This converts the problem to a purely quadratic (i.e. an LQR) problem, but with non-standard initial or final state constraints. This latter problem can then be solved using a version of the matrix Differential Riccati Equation (DRE) for the larger LQR problem. The second step is a partitioning of this larger problem, which then yields the optimal dynamic observer and the DRE of the traditional Kalman filter. For comparison, the solution of the traditional LQ-tracking (Servomechanism) problem is also treated using a similar construction.

Conventional beamforming techniques primarily steer energy along desired directions or focus it at specific locations. These techniques become fragile when facing frequent blockage and highly dynamic propagation environments. In this article, we present caustic beamforming as a new paradigm for wireless beam control. First, we classify representative caustic beams according to their underlying mathematical origins and present three unique properties, namely self-bending, self-healing, and near-field non-diffracting. Building on these propagation properties, we then propose several application scenarios in sixth-generation (6G) networks. We undertake two case studies focused on physical layer security and service stability that highlight the capability of caustic beams to bypass potential eavesdroppers, deliver more uniform coverage, and sustain blockage-resilient links. We further discuss the enabling hardware architectures that facilitate practical deployments, and finally outline key open challenges regarding caustic beams that require further research.

This paper presents a theoretical framework for multi-band localization for a single-path single-input multiple-output (SIMO) system. We derive closed-form Cramer-Rao bounds (CRBs) for angle-of-arrival (AoA) and distance for uniform linear arrays (ULAs), and an intermediate matrix-form formulation for arbitrary array shapes. We also develop benchmark single- and multi-band maximum-likelihood (ML) estimators for AoA-Distance, leveraging a structured Levenberg-Marquardt (LM) refinement procedure. A key contribution is an analytical characterization of the threshold SNR (TSNR) for the proposed estimators. This is the SNR threshold at which the estimator transitions from "off the chart" to CRB-approaching performance, for both TDoA and distance estimation. Numerical simulations confirm that the proposed single- and multi-band estimators achieve the CRB at SNRs above the predicted TSNR, and that multi-band processing simultaneously improves estimation accuracy and reduces SNR requirements. The resulting framework provides a rigorous foundation for next-generation multi-band localization and can be readily extended to elevation estimation, distributed arrays, and multi-path environments.

Automated image retrieval plays an increasingly critical role in modern forensic analysis, supporting investigative workflows that rely on efficient comparison of visual evidence. While prior work has focused primarily on developing and optimizing multimodal retrieval systems, limited attention has been paid to evaluating the forensic applicability of these technologies across diverse real-world scenarios. In this study, we present a unified retrieval framework adapted to four key forensic tasks: (1) tattoo image retrieval given a tattoo query image; (2) tattoo retrieval guided by human-expert textual descriptions, modelling the common situation where a witness verbally describes a tattoo; (3) tattoo retrieval from hand-drawn sketches; and (4) face retrieval from forensic face sketches. Our system leverages a multimodal large language model (MLLM) to automatically generate structured textual descriptions for all queries and gallery images, followed by sentence-transformer embedding for text-based comparison. We evaluate retrieval using visual-only embeddings, text-only embeddings and a multimodal fusion strategy that combines text- and image-based similarity scores derived from state-of-the-art visual feature extractors relevant to each task. The fusion of modalities consistently improves retrieval precision and robustness, especially in scenarios where visual information is limited or noisy (e.g., sketches, partial tattoos, or fragmented witness statements). This work highlights the forensic value of a unified multimodal retrieval pipeline and demonstrates how modern MLLMs can operationalize challenging forensic tasks that traditionally rely on manual expert analysis. Our results position multimodal retrieval as a promising tool for supporting investigative workflows involving tattoos, facial composites, and witness descriptions.

Future 6G heterogeneous wireless networks (HWNs) are expected to support multiple radio access technologies (RATs), dynamic wireless environments, and applications with diverse quality-of-service (QoS) requirements. In such environments, network selection (NS) cannot rely only on instantaneous radio measurements or static ranking rules. Instead, access decisions must account for the evolving wireless state, service intent, packet-level QoS behavior, and candidate-RAT dynamics. This paper proposes a large language model (LLM)-based digital twin (DT) framework for stable, application-aware RAT selection under candidate-set evolution. The main idea is to shift NS from an instantaneous decision-matrix operation to a decision process over an evolving wireless DT state. The constructed DT combines site-specific geometry, Sionna RT-based propagation descriptors, ns-3 packet-level QoS emulation, service context, candidate-RAT information, and decision memory. Rather than acting as a general-purpose controller for 6G networks, the LLM is used for DT-grounded decision intelligence in this specific NS task. On top of this DT, a unified intent agent translates user and service requirements into structured decision priorities for two complementary NS branches: an LLM-assisted multi-attribute decision-making branch (MADM--LLM--NS) and a direct LLM-based ranking branch (LLM--NS). To improve decision stability, the framework further introduces history-aware adaptive normalization (HAAN) and DT-memory-driven retrieval-augmented in-context learning (RA--ICL). Numerical results show that the proposed framework reduces rank-reversal problem and unnecessary handover events, while improving service-aware QoS satisfaction compared with representative MADM-based NS baselines.

While deep learning has significantly advanced image reconstruction of Electrical Capacitance Tomography (ECT), most data-driven methods map directly between capacitance and permittivity distribution, treating the sensor as a black box. This overlooks the electric potential field -- the fundamental physical link governing the nonlinear and ill-posed ``soft-field'' effect. To address this, we propose an electric potential-augmented ECT benchmark dataset designed to explicitly integrate latent physics behind ECT into the learning process. Generated via a COMSOL-MATLAB pipeline for an eight-electrode sensor as an example, the dataset comprises 20,000 randomized samples across four typical flow patterns. Crucially, alongside the conventional capacitance vectors and permittivity distributions depicted as images, each sample preserves eight excitation-wise full-field potential maps. Beyond data release, we provide illustrative evaluation protocols for both forward and inverse problems of ECT. Through comprehensive testing on both in-distribution (IID) and out-of-distribution (OOD) scenarios, we systematically demonstrate how the inclusion of electric potential maps enhances modeling accuracy and robustness. Fundamentally, the explicit inclusion of latent field information significantly lowers the barrier to integrating physical laws into ECT modeling, thereby establishing a standardized foundation for future physics-guided machine learning of ECT image reconstruction.

SSpeech imagery is attractive as a brain-computer interface paradigm for communication because it is endogenous and intrinsically linguistic. Yet despite growing interest, its dominant scalp-EEG spatiotemporal characteristics remain poorly characterized. Here, we asked how speech imagery appears in scalp EEG and compared it against finger motor imagery. Using a within-subject dataset containing speech imagery, finger motor imagery, and no-task trials recorded under the same trial structure, we analyzed band-power dynamics across channels and time. Finger motor imagery showed the expected contralateral mu/alpha and low-beta desynchronization over sensorimotor areas, whereas speech imagery showed a weaker, more distributed alpha-dominant increase. After normalization to each condition's own post-trial interval, the speech-related alpha increase changed only modestly after cue onset, indicating that much of the speech-versus-no-task difference was already present during the instruction period. A classifier discriminating imagery from no-task reached mean balanced accuracies of 0.563 $\pm$ 0.072 for speech imagery and 0.718 $\pm$ 0.127 for motor imagery, with a stronger alpha/beta dependence for motor imagery than for speech imagery. Together, these results provide a clearer group-level characterization of speech imagery in scalp EEG and indicate that its dominant spatiotemporal pattern differs from that of finger motor imagery and is more consistent with substantial non-articulatory task-related contributions than with a clear articulatory-motor analogue.

Spoken dialogue models typically start from text LLM backbones, yet reasoning often degrades when conditioning on speech instead of text. We attribute part of this modality gap to a temporal-granularity mismatch: speech tokens are temporally redundant and far longer than text under matched semantics, diluting per-token semantic density and weakening text-native reasoning dynamics. We study speech token design as a representation selection problem and sweep frame rates under a frozen LLM backbone with a fixed information rate. To make low frame rates feasible, we introduce factorized FSQ and a lightweight non-autoregressive audio LM head, scaling capacity to nearly 300\,bits/frame without sacrificing efficient prediction. With the bottleneck removed, we sweep frame rates (50$\rightarrow$2.08\,Hz) and alignment depth, and observe a consistent best regime for speech QA at 4.17\,Hz with intermediate-layer representation alignment.

Optimization-based feedrate planning offers the potential to significantly increase machining productivity, but its industrial adoption has been limited by high computational cost and extensive tuning effort. This paper proposes a lexicographic feedrate optimization principle that adaptively balances finishing time and motion smoothness in a tuning-free manner. To further improve computational efficiency, the optimization scheme is extended by a sparsity-exploiting formulation combined with a sequential windowing strategy, enabling real-time capable execution. In addition, a unified toolpath parameterization scheme is incorporated to synchronously handle tool position and orientation within the optimization framework. For a five-axis freeform test contour, the proposed method takes 14 s on an Intel i5-3470 CPU to optimize feedrate profiles for long toolpaths with 100,000 constraint checkpoints, and 52 s on a high-performance AMD 9950X CPU to handle one million checkpoints. Compared to an industrial CNC kernel, the resulting finishing time is reduced by more than 15 %.

A privacy-compliant indoor localization approach utilizing a 3-D near-field (NF) passive radar imaging technique is presented. This technique leverages ubiquitously radiated electromagnetic fields for imaging, with passive tags introduced to enhance the strength of scattering fields, thereby enabling precise localization at the imaging level. The method also supports localization in non-ideal imaging scenarios, such as for limited bandwidth or in highly-reflective environments. Based on their geometrical properties the simple and low-cost passive tags enable intuitive differentiation between individuals or objects. Associated privacy protection mechanisms are discussed, where the frequency-varying properties of the passive tags provide additional flexibility and potential applications under privacy and ethical considerations. Several forms of passive tags are presented, where both simulation and experimental results validate the effectiveness of the proposed passive tag designs.

Compliant element systems with ultra-large deformation display rich nonlinear dynamics and pose challenging control problems, which, when solved, could enable enhancements in several mechatronics applications, such as soft robotics, MEMS, and biomedical applications. This paper considers post-buckled dynamic analysis of an inverted ultra-flexible pendulum actuated by a rotary hub. We first derive a complete set of equations capturing the dynamics of the system, essential for control development, using the assumed modes method framework, considering ultra-large deformations. Constrained Lagrange formulation is used for the same. In the perfect inverted configuration with zero hub angle, the buckled beam would display two symmetric stable equilibria and one unstable. However, as the hub angle changes on either side, the equilibrium positions shift, and eventually two of them vanish, and we are left with only one stable equilibrium. We use the dynamic equations to characterize this interesting phenomenon, demonstrating the continuous state dependence of multiple equilibria. Furthermore, experimental counterparts of the equilibrium results are meticulously obtained and discussed. Moreover, simulation results capture the nonlinear dynamics of this system. Overall, the work establishes a solid mathematical foundation with a control-amenable model for futuristic ultra-compliant mechatronic systems.

Peer-to-peer (P2P) energy trading requires network-aware coordination because transactions are physically realized through distribution networks. However, sensitivity-based coordination causes a confidentiality-verifiability tradeoff, as network sensitivities may reveal vulnerable components while undisclosed sensitivities prevent participants from verifying utility-provided transaction guides. This paper proposes a zero-knowledge-proof-based method for verifying the computational integrity of network-constrained transaction guides with respect to committed private network data, without exposing network-sensitivity information. The guide defines admissible injection and withdrawal volumes derived from sign-decomposed sensitivity matrices while satisfying balance, voltage, line-flow, and optimality conditions. These conditions are encoded in an arithmetic circuit, represented as R1CS constraints and a quadratic arithmetic program, and verified using a bilinear pairing. Blockchain commitments bind the approved circuit, public inputs, statement identifiers, proof, and verification result for tamper-evident auditability. The proposed proof certifies correct guide computation from committed network data; the authenticity of the committed network data is handled through an explicit registration and attestation assumption. Case studies on a modified IEEE 33-bus system show satisfaction of network constraints after clearing, rejection of public-input and witness-inconsistency attacks, and practical on-chain overhead, with an 806-byte proof.

In this paper, we study the power allocation for an integrated sensing and communication (ISAC) system which tracks a mobile target. We first model the problem as a Markov decision process, and then tackle it with a soft actor-critic (SAC) based deep reinforcement learning (DRL) approach. We also combine a Dirichlet policy, which naturally produces normalized continuous actions under random target motion. To exploit different features of sensing and communication operations, we carefully design a reward function such that the system can dynamically control power allocation to conserve resources. The simulation results demonstrate that the proposed scheme enhances tracking performance compared to other baselines while sustaining communication performance.

Face recognition systems have advanced significantly through deep learning techniques, delivering high performance and robustness in complex scenarios. However, these approaches incur substantial computational overhead, limiting their in situ applicability in resource-constrained platforms such as drones, where they can address challenges including non-frontal facial imagery. Memristor-based neuromorphic systems have emerged as a compelling approach for edge AI applications, combining biologically inspired processing with efficient and scalable computation. In this work, we propose a facial recognition framework that addresses non-frontal pose variations by integrating lightweight generative adversarial network (GAN)-based pose frontalisation with memristor-based neuromorphic recognition. The experimental results on two datasets demonstrate the effectiveness of combining adversarial learning with memristive technology, achieving up to 96% identification accuracy. The proposed approach alleviates the computational bottlenecks of conventional AI and offers a scalable, efficient solution for face recognition in dynamic real-world environments.

Recently, movable antenna (MA) has attracted wide attention in wireless communications due to its potential in enhancing wireless communication performance via local movement within a confined region. However, antenna position optimization (APO) has emerged as a major challenge for MAs, due to the lack of a tractable, analytical, and accurate channel model in terms of antenna positions. Although existing works have developed various algorithms for APO, most of them are based on simplified theoretical channel models, which limit their generality. To address this challenge, in this article, we present more general and effective APO algorithms for different purposes, categorized as continuous APO and discrete APO, respectively. Continuous APO is mainly applied for flexible array signal processing to boost large-scale communication performance, while discrete APO is applied for small-scale multi-path channel reshaping. Specifically, the discrete APO discretizes the antenna movement region into multiple sampling points and employs discrete algorithms to determine the optimal MA positions based on the point-wise channel state information (CSI), without the need for an analytical channel model. To reduce the overhead for CSI acquisition, we also present more efficient learning-based APO algorithms that operate without requiring full point-wise CSI. Finally, we compare the application scenarios of the proposed algorithms and validate their effectiveness with numerical results.

Accurate state of charge (SOC) estimation of lithium iron phosphate (LFP) batteries remains challenging because of their flat open-circuit-voltage (OCV)-SOC characteristics, temperature-dependent dynamics, and sensitivity to initialization errors. Here, we propose a physics-guided residual Kalman learning (PRKL) framework for electrochemical-model-based SOC estimation. PRKL combines a control-oriented single-particle-model-based extended Kalman filter (EKF), which provides recursive physical state propagation, with a gated recurrent unit (GRU) residual learner that compensates structured EKF errors using electrochemical states and measurement features. The framework is evaluated on a public graphite/LFP dataset covering three dynamic drive cycles, eight temperatures from -10 to 50 degrees C, and initialization offsets up to 20 percent. Using dynamic stress test (DST) and federal urban driving schedule (FUDS) cycles for training and the supplemental federal test procedure (US06) cycle for cross-profile testing within the same cell dataset, PRKL achieves a global average root mean square error (RMSE) of 1.19 percent, corresponding to a 77 percent reduction relative to the physics-only EKF. These results show that electrochemical state information can guide residual learning and improve recursive SOC estimation for LFP batteries. The present validation supports cross-profile robustness within the studied dataset and provides a basis for future cross-cell, ageing-aware, and embedded-platform validation.

We propose a zonotopic framework for synthesizing a single robust state feedback controller that is certified to stabilize every plant inside a matrix zonotope, describing linearly varying parameters or parametric uncertainty. Common robust design strategies rely on checking many vertex models or on complex gain-scheduling, leading to high offline computation and implementation complexity. Our approach finds a single gain that is provably valid across the entire parameter domain, which is simpler to implement and can reduce conservatism by exploiting the structure of the zonotope. We formulate the robust synthesis as a single convex program tailored to the zonotope representation and incorporate practical performance requirements (actuator constraints, decay rate, disturbance attenuation) into the same synthesis stage. In numerical experiments on a representative 4-state example, our controller provides larger stability coverage across the parameter domain, attains comparable transient performance and control effort to more complex designs, and significantly reduces the number and scale of offline synthesis problems required by other robust approaches, compared to common-vertex gain, $H_{\infty}$, and $\mu$-synthesis baselines.

This paper presents a collaborative adaptive formation control framework for autonomous vehicles (AVs), that explicitly handles system uncertainties, input saturation, and communication delays. To overcome the inherent physical torque limits of steering and braking actuators, an input saturation compensation mechanism is introduced to render nonlinearities tractable and improve control reliability. Additionally, a delay-compensating auxiliary system is designed to mitigate the effects of communication delays and reduce tracking errors. Our framework incorporates a dynamic-threshold event-triggered control (ETC) strategy to optimize resource usage. Additionally, uncertainty observers and symmetric barrier Lyapunov functions are developed to ensure robust and safe formation maneuvers. Finally, the effectiveness of the proposed approach is validated through numerical simulations of vehicle formations, complemented by a 3D visualization video demonstrating the dynamic fleet reconfiguration process.

Epilepsy affects over 50 million individuals globally, underscoring the need for automated seizure detection systems that can alleviate clinicians workload and enhance the accuracy of patient seizure diaries. In wearable EEG applications, however, reliable detection remains challenging due to the limited spatial resolution of low-density electrode configurations, reduced signal-to-noise ratios, and the scarcity of diverse, publicly available training datasets. This study investigates the efficacy of hybrid deep learning architectures for automated seizure detection using a simulated behind-the-ear montage derived from the Temple University Seizure Corpus (TUSZ, v2.0.3). We conduct a systematic comparison of several CNN-RNN models, including LSTM- and GRU-based variants, across multiple EEG montages to evaluate their capacity to compensate for the loss of spatial information inherent to reduced electrode configurations. The proposed CNN-Merged model, which integrates temporal and spectral feature representations, demonstrates superior performance, achieving a ROC AUC of 85.89% and a balanced accuracy of 79.11% on the held-out test set. Furthermore, the model exhibits strong robustness across different reference montages, effectively bridging the performance gap between conventional full-scalp recordings and resource-constrained wearable systems. These findings substantiate the potential of hybrid deep learning models as a promising avenue toward robust, patient-independent seizure detection in low-density EEG applications.

High-voltage direct current (HDVC) transmission systems based on modular multilevel converters (MMCs) have become a key topology in modern power systems. The dynamics of MMCs exhibit strong multivariable coupling, constraints, and uncertainties, motivating the use of model predictive control (MPC) to enhance current regulation performance. However, MPC tuning is nontrivial and does not inherently guarantee stability or robustness, particularly in the presence of model uncertainties. This paper proposes a MPC tuning method that ensures robust performance under bounded model uncertainties. This method solves a convex linear optimization problem to compute the optimal weighting matrices Q, R, and P ensuring optimality and reproducibility. As a result, robustness is enhanced without increasing the online computation burden. The effectiveness of the method is validated through testing on a real-time digital simulator (RTDS) model of a point-to-point HVDC system. Results demonstrate improved performance compared to conventional LQR-based MPC tuning.

CSI-based localization with spatially distributed antenna arrays exposes a basic resource trade-off. Each array can provide a rich view of the channel, but forwarding observations from all arrays to a fusion center is wasteful when only a few carry useful information, and the shared uplink supports only a limited number of simultaneous transmissions. We let each array decide locally whether its current observation is worth reporting, subject to a budget on the average number of active transmitters. We refer to this abstraction as Edge-Triggered Distributed Inference (ETDI). It captures a broader class of task-oriented communication problems where resource-constrained devices share an access channel for a common inference task. We instantiate ETDI for CSI-based localization, a common scenario in vehicular IoT networks. Spatially distributed remote antenna arrays (RAAs) encode local channel state information (CSI) from user equipment (UE) transmissions into latent features, and the fusion center estimates the UE position from the subset of reported features. We propose NARRAS, a decentralized reporting policy in which each RAA combines a recurrent summary of its recent observations with a memory of the last latent it transmitted. Training controls an explicit activity budget through differentiable activity penalties and validation-calibrated deterministic thresholds, and uses channel-chart regularization to shape the latent geometry. Experiments show that, at comparable uplink activity, NARRAS improves localization accuracy over learned and heuristic sparse-reporting strategies, while dense full-report models remain useful budget-free references. In low-activity regimes, chart regularization further reduces high-percentile localization errors, suggesting that geometry-aware latent representations are more robust under sparse reporting.

We consider a multi-receiver status update system in which a transmitter monitors a finite-state semi-Markov source and decides whether to stay idle, unicast an update, or broadcast a common update. We formulate a risk-aware scheduling problem that minimizes the long-term average sum of the average Age of Incorrect Information (AoII), average risk ratio, and transmission cost. The risk state is defined by whether the AoII exceeds a prescribed threshold. We solve the problem using model-based and model-free policies and compare them with two baselines. Numerical results show that the proposed policies outperform the baselines, exploit both unicast and broadcast transmissions, and capture the effect of the dwell-time law on scheduling performance.

To meet the demands of 6G wireless systems operating in high-mobility scenarios, this paper presents a design of a random multiplexing (RM) communication system that is both storage-efficient and highly reliable. In principle, RM with cross-domain memory approximate message passing (CD-MAMP) can achieve replica maximum a posteriori (MAP)-optimal performance by constructing a fully dense equivalent channel matrix. However, its practical implementation is hindered by the large storage overhead of conventional interleavers and by performance degradation in severely ill-conditioned channels, which existing related work (focusing on interleaving and transform designs) fails to address simultaneously. To overcome these issues, we develop a storage-efficient and highly reliable system that integrates RM with CD-MAMP, referred to as RM-MAMP. Specifically, we propose a Logistic chaotic mapping interleaver with a quantitative parameter-selection criterion, and a dual-stage high-order permutation polynomial interleaver, both of which achieve nearly identical bit-error-rate (BER) as fully random interleavers while reducing the interleaver storage from O(N) to O(1) and significantly lowering interleaver signaling overhead. We further propose a highly reliable interleaved transform framework, comprising an interleaved phase perturbation transform and a multi-layer interleaved coupled transform, to enhance the incoherence and diversity of the equivalent channel matrix. Simulation results show that the proposed storage-efficient interleavers maintain BER performance comparable to fully random interleavers, while the highly reliable transforms provide over 4 dB gain in severely time-varying channels, confirming the dual benefits of reduced storage overhead and improved robustness for the enhanced RM-MAMP system.

This manuscript addresses a hierarchical control system designed to suppress traffic congestion. The lower-layered controllers, implemented in each controlled vehicle, monitor microscopic vehicle behaviors and assist human drivers to ensure sufficient spacing for following vehicles. This spacing logic is designed based on the Control Barrier Function. Meanwhile, the upper-layered controller monitors the macroscopic traffic flow and activates the necessary lower-layered controllers, using a data-driven approach for the activation logic design. Furthermore, the effectiveness of the proposed control system is evaluated in a traffic flow simulation environment constructed using real-world traffic data.

We investigate the impact of power amplifier (PA) nonlinearities on the sensing performance of affine filter bank modulation (AFBM). While AFBM offers several advantageous properties for integrated sensing and communications (ISAC) - including reduced out-of-band emission (OOBE), low peak-to-average power ratio (PAPR), and natural robustness to doubly-dispersive (DD) channel effects - mitigating waveform distortion typically requires highly linear PAs. This creates a fundamental contradiction with ISAC applications, which demand high transmit power for reliable sensing. Our analytical results reveal that the structure of the effective AFBM modulation matrix dictates how distortion propagates within the ambiguity function (AF). Furthermore, simulations demonstrate that both the AF and the overall sensing performance of AFBM remain remarkably insensitive to such nonlinearities. These findings highlight the robustness of AFBM, making it a highly viable candidate for practical ISAC deployments constrained by hardware impairments.

This paper investigates an analytical Koopman-based nonlinear model predictive control (K-NMPC) approach for tracking control of virtually coupled train systems. A nonlinear train movement model incorporating train dynamics, speed and control input limits, passenger comfort constraints, and collision avoidance is systematically lifted into a finite-dimensional Koopman space through closed-form observable functions. After freezing the affine parameter-varying lifted predictor along the shifted predicted trajectory, the online optimal control problem is solved as a quadratic program that can be solved efficiently. The proposed KNMPC is benchmarked against a time-discrete NMPC scheme, demonstrating comparable control performance with significantly reduced online computation time and strong potential for real-time implementation in practical virtually coupled train control systems.