In minimally invasive surgical robotics, catheter-scale Fiber Bragg Grating (FBG) sensors are promising due to their ability to estimate multi-dimensional forces by multiplexing several optical channels. However, deploying these compact multi-channel sensors introduces two critical engineering challenges: inherent nonlinear cross-axis coupling during complex deformations, and intermittent channel dropouts caused by fiber fractures in constrained workspaces. These compounding issues severely degrade force estimation. Existing fault-tolerant approaches rely on combinatorial model banks, which scale exponentially with the channel count and demand prohibitively expensive per-pattern calibration. In this paper, we propose a unified, self-supervised mask-aware Transformer that explicitly models channel availability to enable graceful degradation under diverse and dynamic sensor failures. The encoder is pretrained via masked-channel reconstruction on unlabeled data streams and fine-tuned for force regression using a balanced clean-and-corrupted-view objective alongside a dynamic corruption curriculum. Furthermore, a parallel uncertainty head, trained via heteroscedastic Gaussian negative log-likelihood, predicts per-axis confidence in a single forward pass, circumventing the overhead of multi-pass ensembles. Evaluated on a catheter-scale 8-channel FBG dataset, our single unified model achieves a nominal Root Mean Square Error (RMSE) of 0.0066~N and degrades gracefully to 0.0126~N under severe 4-channel failures. This significantly outperforms a comprehensive model bank of 255 per-pattern neural networks (0.0154~N at 4-channel loss) while eliminating pattern-specific calibration.

Model merging has emerged as a training-free alternative to multi-task learning, aiming to combine multiple task-specific fine-tuned models into a single multi-task model. Most existing model merging approaches follow the Task Arithmetic paradigm, which decomposes fine-tuned weights into pre-trained parameters and task vectors, and performs merging exclusively in the task-vector space. The effectiveness of this paradigm implicitly relies on the assumption that task-specific knowledge is encoded solely within task vectors. We argue that this assumption generally does not hold due to the intrinsic task preferences of pre-trained models. Specifically, we identify \textbf{Load-Bearing Wall (LBW) dimensions}, namely some task-critical knowledge that remains embedded in the pre-trained weights rather than being fully transferred into task vectors. We characterize LBW dimensions from both scalar-weight and subspace perspectives, thereby covering the major paradigms of existing model merging methods. Our analysis reveals that, by ignoring LBW dimensions, task-vector-based approaches fail to fully resolve task conflicts and may inadvertently damage task-specific knowledge encoded in the pre-trained model, leading to degradation. To address this issue, we propose PACT, which preserves the anchored task-specific cores (i.e., LBW dimensions) within task vectors by aligning their orthogonal complements with the subspace of the pre-trained weights. These aligned subspace components are then removed from the task vectors before applying existing model merging algorithms. Furthermore, we develop an efficient variant based on randomized SVD to improve scalability. PACT can be seamlessly integrated with existing methods. Extensive experiments across multiple benchmarks demonstrate that PACT consistently enhances mainstream model merging approaches and establishes new state-of-the-art performance.

Robotic jumping is pivotal in applications such as search and rescue and logistics, where crossing obstacles and enhancing mobility efficiency are critical. The Spring-Loaded Inverted Pendulum (SLIP) model leverages simplified spring-mass dynamics that naturally encode biologically plausible hopping motions, yet its performance degrades on irregular terrain due to idealized assumptions regarding contact and joint dynamics. Meanwhile, Reinforcement Learning (RL) can adapt to diverse and complex environments but often requires extensive data from unguided exploration. The complementary strengths of SLIP's physically grounded baseline and RL's adaptive capabilities motivate a hybrid framework that overcomes these individual limitations. We therefore propose Spring-loaded Reinforcement Learning (SRL), which integrates SLIP-based feedforward control signals with RL-driven real-time feedback, enabling continuous optimization of robotic jumping. Experimental results demonstrate that SRL can achieve more stable jumps with much less training time than the baseline method, maintaining an average position tracking error below 0.1 m and velocity tracking errors within +/-3% of the target values. Through bipedal and quadrupedal simulations of ground and stair jumping, as well as sim-to-sim and sim-to-real validations, SRL exhibits robust adaptability to various task requirements and environmental complexities, underscoring its potential for real-world deployment.

Natural language understanding often depends on meanings that are implied rather than explicitly stated, requiring pragmatic reasoning. Despite strong performance on math and logical reasoning, large language models (LLMs) still struggle with making pragmatic inferences, often choosing literal interpretations. To improve LLM pragmatic reasoning, we introduce PragReST, a self-supervised framework that constructs pragmatic QA data, generates counterfactual reasoning traces, and trains models to internalize them through supervised fine-tuning and reinforcement learning, without human-labeled training data or distillation from a stronger teacher. Across four pragmatic benchmarks (PragMega, Ludwig, MetoQA, and AltPrag), PragReST improves over backbone models, task-specific pragmatic tuning baselines, and non-counterfactual variants of the same pipeline. On accuracy-based benchmarks, PragReST improves over the instruct backbone by 5.37 and 5.50% (absolute) for Qwen3-8B and Qwen3-14B, respectively. Our error analysis and ablations underscore the importance of counterfactual reasoning: PragReST primarily reduces errors caused by failures to contrast observed utterances with plausible alternatives, and removing counterfactual reasoning substantially reduces performance. Moreover, our training preserves out-of-domain performance on general-knowledge and mathematical reasoning benchmarks.

Dynamic 4D Gaussian Splatting reconstructs deforming scenes with high fidelity and is increasingly adopted as a representation for dynamic 3D scenes. Putting such a scene to use, for editing, manipulation or motion analysis, first requires segmenting it: grouping the Gaussian primitives into coherent objects. Current pipelines obtain this grouping by importing 2D masks from foundation models such as SAM and lifting or distilling them into the Gaussian representation. In dynamic scenes these masks must be generated across many frames and views, which is costly, and the resulting segmentation can depend strongly on the quality and consistency of those external masks. We ask how much object-level structure can instead be recovered from the Gaussians themselves, and propose Intrinsic-GS, a training-free, mask-free method that builds a sparse affinity graph over Gaussian primitives from appearance, orientation, scale, deformation-trajectory and non-learned rendered-boundary cues. The graph is partitioned with Leiden community detection, requiring no foundation model and no learned feature field. On the standard 4D Gaussian segmentation benchmarks, Neu3D and HyperNeRF, Intrinsic-GS recovers substantial object structure without mask supervision, reaching 0.746 mIoU on Neu3D and 0.575 on HyperNeRF; on Neu3D, a geometry-only variant reaches 0.902 mIoU, matching SAM-supervised TRASE. On HyperNeRF, Intrinsic-GS runs 12.5x faster than the mask-generation and feature-rendering stages used by mask-supervised pipelines. These results suggest that much of the segmentation signal is already encoded in the Gaussians themselves, offering a fast, mask-free direction for 3D and 4D Gaussian segmentation that may also point toward more generalizable, robust segmentation in settings where external masks are unreliable or expensive.

Relational databases are widely used for managing structured data in real-world systems. Detecting anomalies from such relational data is crucial for identifying fraud, risks, and abnormal behaviors, yet remains under-explored. The key challenges lie in the intrinsic complexity of relational data: multi-table attributes are high-dimensional and heterogeneous, making sparse abnormal clues easy to overwhelm by normal or irrelevant information; and anomalies may further manifest as abnormal connection patterns across different foreign-key relations, which existing tabular and graph anomaly detection methods are ill-suited to capture. To address them, we propose RelAD, a reconstruction-based framework that captures anomalies from both attribute and relational edge reconstruction. RelAD contains two core modules: conditional sparse-gated attribute reconstruction, which suppresses redundant multi-table attributes and emphasizes abnormal semantic blocks, and dual-view multi-relational edge reconstruction, which detects relation-specific abnormal connections from both intrinsic and behavioral entity profiles. The resulting attribute and relational signals are integrated through a lightweight fusion module to produce the final anomaly score. We further construct 6 benchmark datasets with systematic anomalies, on which extensive experiments show that RelAD consistently outperforms other baselines while achieving competitive efficiency.

Existing information extraction (IE) tasks increasingly adopt in-context learning (ICL) with large language models. However, current approaches either show inconsistent performance across model scales or lack systematic optimization and generalizability. Building on this, we propose BCL (Bayesian In-Context Learning Framework for Information Extraction), the first optimization framework that uses particle filtering with Bayesian updates to systematically refine label representations across IE tasks. Through four steps initialization, observation, weight update, and resampling, BCL generalizes to both sequence labeling and relation classification paradigms. Extensive experiments demonstrate substantial and consistent improvements over existing approaches.

Evaluating generalist robot manipulation policies in the real world is expensive, slow, and difficult to scale. Action-conditioned video world models offer a scalable alternative by simulating policy rollouts. Autoregressive rollouts accumulate compounding errors, observations across multiple camera views must remain mutually consistent, and the evaluator must generalize to policies whose behaviors lie outside the training distribution. We address these challenges with SC3-Eval, a self-consistent video generation recipe that adapts a pre-trained video foundation model into an accurate policy evaluator by enforcing three complementary forms of consistency. First, forward-inverse dynamics consistency jointly trains the model to predict frames from actions and to recover actions from frames, anchoring generated rollouts to a physically plausible action manifold and counteracting the drift a forward-only model cannot penalize. Second, cross-view consistency trains the model to inpaint each camera view from the other, keeping the multi-camera observation coherent over long rollouts without any explicit memory mechanism. Third, test-time consistency reuses the inverse dynamics mode at inference as a per-action-chunk uncertainty signal that terminates rollouts whose generated frames drift away from the requested actions. We also demonstrate SC3-Eval rollouts reproduce the failure modes that policies exhibit in real-world rollouts, supporting fine-grained diagnostic comparison rather than aggregate ranking alone. Across seven real-world vision-language-action policies, SC3-Eval attains a closed-loop Pearson correlation of $0.929$ and MMRV of $0.119$, outperforming three strong prior video-model-based baselines, and generalizes to new tasks.

Vision-Language models (VLMs) reliability in medical diagnosis is challenged by trust-undermining hallucinations. Existing hallucination detection approaches mainly focus on identifying factual inconsistencies between generated text and reference data. While some studies analyze where models attend in images, they seldom verify whether such attention truly reflects the visual evidence supporting the generated text. To address this gap, we propose Co}unter-Evidence Verification (CoEV), a training-free plug-and-play framework that detects and corrects hallucinations through evidence-based factual consistency verification. CoEV performs bidirectional verification between textual assertions and visual evidence, testing whether each statement is supported by its corresponding evidence region, and assigns each statement into a four-quadrant diagnostic map capturing combinations of text factuality and visual grounding. CoEV detects hallucinated content and serves as a post hoc refinement tool, correcting hallucinations without retraining. Extensive experiments on four medical datasets show that CoEV combats hallucinations in VLMs.For hallucination detection, CoEV consistently outperforms existing methods, improving average PR-AUC and ROC-AUC by 3.0% and 3.9% absolute points respectively, with notable gains of up to 18.5% in specific VQA scenarios. For hallucination correction, it improves Micro-F1 by up to 12.5%, reduces hallucination rates by over 11.9% on medical report generation, and also boosts medical VQA accuracy. These results show that CoEV enables reliable detection and correction of hallucinations, providing clinicians with dependable, evidence-based cues for diagnosis. Code will be released upon acceptance.

It is essential for large language model (LLM) technology to serve many different cultural sub-communities in a manner that is acceptable to each community. However, research on LLM alignment has so far predominantly focused on predicting a unified response preference of annotators from certain regions. This paper aims to advance the development of alignment models with a more global outlook, that are able to accurately represent the preferences of subcommunities and do not exhibit excessive bias towards any of them. We focus on the development of reward models for this purpose and present a novel reward model training algorithm (SCPO) that can incorporate diverse cultural preferences in a balanced manner. Our method results in performance increases of the minority reward model of up to 7 points over the baseline model across two datasets, PRISM and GlobalOpinionQA, and across 7 countries. SCPO is up to 280% more training data-efficient than full-data finetuning of reward models. In addition, we perform analysis of bias by separately evaluating on the preference of subcommunities and show that excessive bias is mitigated via our weighting method. Our code is available at https://github.com/minsik-ai/Steerable-Cultural-Preference

Precision visual inspection underpins quality assurance across aerospace, semiconductor, and medical manufacturing, where undetected surface anomalies on high-value parts translate directly into scrap, rework, and field failures. Robotic visual inspection requires precise alignment between the end-effector and local surface geometry in the presence of perception noise and surface irregularities. In industrial settings, a human operator is often kept in the loop via teleoperation or shared autonomy, introducing real-time adjustments that render purely offline motion planning inadequate. This motivates control architectures capable of reactive, compliant behavior under combined human and perceptual uncertainty. This paper presents a novel real-time, closed-loop robotic orientation control pipeline for precision visual inspection, with an admittance-based framework that unifies operator input and perception-driven surface alignment. We design the end-effector as a virtual sphere moving through a viscous medium, such that the resulting physically interpretable mass--damper system generates synchronized, compliant motion from orientation error and operator commands. We validate the framework on a 6-DOF manipulator demonstrating stable normal-tracking and a final mean orientation error of 0.4°.

Decision making in lithium production is challenging, whether from an investor's perspective or a strategic production standpoint. Determining which mines to open and when to open them involves not only geological and price uncertainties, but also complexities around the choice of extraction method, from direct lithium extraction to hard rock mining. Prior work explored models of this problem and different methods to optimize mining decisions; these models did not account for uncertainty in pricing, uncertainty in demand, or different mining technologies to extract lithium. Incorporating different pricing models and extraction technology into these models enables more robust strategies for determining not only when and where to open a mine, but also which method of production to pursue. We frame the problem as a partially observable Markov decision process (POMDP) and solve using belief state planning methods to get optimal decision making. In our study, we show that POMDP solvers outperform human inspired heuristics by dynamically adapting to shifting lithium price regimes (static, linear, exponential, and stochastic) through belief state planning and explicit uncertainty management. By optimally sequencing exploration, production, and technology choice, the framework achieves higher demand fulfillment and more balanced economic environmental outcomes over the projects lifetime in all different pricing and deposit scenarios.

Chinese dialects discrimination is a challenging natural language processing task due to scarce annotation resource. In this article, we develop a novel Chinese dialects discrimination framework with transfer learning and data augmentation (CDDTLDA) in order to overcome the shortage of resources. To be more specific, we first use a relatively larger Chinese dialects corpus to train a source-side automatic speech recognition (ASR) model. Then, we adopt a simple but effective data augmentation method (i.e., speed, pitch, and noise disturbance) to augment the target-side low-resource Chinese dialects, and fine-tune another target ASR model based on the previous source-side ASR model. Meanwhile, the potential common semantic features between source-side and target-side ASR models can be captured by using self-attention mechanism. Finally, we extract the hidden semantic representation in the target ASR model to conduct Chinese dialects discrimination. Our extensive experimental results demonstrate that our model significantly outperforms state-of-the-art methods on two benchmark Chinese dialects corpora.

In real-world reinforcement learning (RL), the choice of action space can play a key role in shaping motion smoothness, safety, and overall task performance. In this study, we evaluate pose increment, pose velocity, joint position increment, and joint velocity across two vision-based manipulation tasks: object picking and pushing. We train policies in simulation and deploy them to the real world using sim-to-real transfer. We find that action-space representation indeed significantly affects sim-to-real performance. In particular, we find that the joint velocity action space is best for the vision-based picking and pushing tasks in terms of smoothness and final task performance. We also provide practical guidance for RL practitioners in choosing action spaces for both simulation and real-world experiments.

Generative AI has made content creation increasingly accessible, but many AI-generated videos lack narrative coherence and creative direction, issues that become more substantial at longer durations. Unlike coding, where AI generation benefits from reliable feedback and techniques such as recurrent self-improvement, video generation requires subjective feedback about plot, scenes, and narrative, which naturally motivates approaches that incorporate human creative direction. We introduce CHIEF, a human-AI co-creation video generation framework that places the creator at the center of human-in-the-loop iterative video refinement, and supports them by providing automatic subjective feedback. The creator incorporates their creative direction by driving each iteration, while their revisions are incorporated by a specialized refiner agent. The feedback loop is generated by persona-conditioned multimodal LLMs that watch generated videos and produce subjective critique from the audience perspectives, providing feedback that self-evaluation alone cannot capture. To test the effectiveness of our proposed framework, we work with high school and college students with no prior filmmaking experience to create videos, from short 1-minute videos to a complete short 10-minute film with a complicated plot.

Action chunking has become a common interface for vision-language-action (VLA) models, enabling low-frequency policy inference to drive high-frequency robot execution. However, once an action chunk is committed, its open-loop execution can be brittle under stochastic dynamics, hardware execution errors, and partial observability. We propose DREAM-Chunk, a test-time scaling method that augments chunking-based policies with a lightweight latent world model, without requiring additional policy fine-tuning. At test time, DREAM-Chunk samples multiple candidate action chunks, rolls out their predicted latent futures, and selects actions from the chunk whose predicted state best matches the observed rollout. In this way, DREAM-Chunk uses additional test-time computation to cover multiple plausible stochastic futures and improve reactivity during long-horizon chunk execution. On the Kinetix benchmark, DREAM-Chunk improves robustness under increasing action noise and benefits from larger candidate sample sizes, especially when demonstrations contain corrective behaviors. We further validate DREAM-Chunk on four manipulation tasks across two robot platforms and two VLA policies under various sources of stochasticity. Across simulation and hardware experiments, DREAM-Chunk improves the robustness of action-chunking policies in stochastic dynamics.

Decoder-only Transformers compute attention over the KV cache of preceding tokens. Keys (and Values) are typically represented with the same dimensionality, regardless of its distance from the prediction target. In natural language, however, the next word is most strongly influenced by the immediately preceding tokens. We hypothesize that local and distant tokens impose asymmetric demands on representational capacity: local tokens are more critical for predicting immediate outputs and thus require richer representations, whereas distant tokens primarily serve as long-range memory, for which lower-dimensional representations may suffice. We formalize this idea as Distance-Adaptive Representation (DAR), implemented in a controlled setting that preserves full-dimensional representations within a local context window while assigning reduced-dimensional representations (e.g. 1/4 of the original dimensionality) to tokens beyond that window. Across multiple pretraining scales (70M to 410M parameters), as well as continued supervised fine-tuning on a 1B-scale model, this approach closely matches the performance of full-dimensional baselines. In contrast, uniformly reducing dimensionality across all token positions leads to worse performance. These results challenge the common assumption that key and value dimensionality should be uniform across token positions. Our findings suggest a new direction for designing attention architectures that adaptively allocate representational capacity across sequences, enabling further reductions in KV cache during inference.

Physical events are not understood by their names alone, but by the causal state changes that compose them. A clip-level label such as "bounce" can be correct while hiding the process that makes the event physically valid, from support loss and contact onset to rebound and settling. To make this hidden process explicit, we introduce Atomic Physical Transitions (APTs): minimal, temporally localized state changes that bind a visible cue to an active physical mechanism and before/after dynamical regimes. An APT chain represents a video as an ordered causal transition sequence rather than a single aggregate event label: event labels tell what happened; APT chains explain why it happened. To make APTs learnable by VLMs, we construct mixed-source APT data from human annotations and simulator ground truth, covering 14 transition types across contact, gravity, friction, and rotation/stability, with 27,303 timed instances over 1,246 trials. Using this data, we find that current VLMs miss transition-level physics, with zero-shot recall at most 14% and errors dominated by missed transitions. Direct fine-tuning on APT chains improves transition detection but causes event-level forgetting, indicating that the model learns a specialized answer format rather than a reusable physical representation. We therefore propose APT-Tune, a parameter-efficient recipe that teaches VLMs to use causal transitions without forgetting how to answer video questions. It combines image-pad-aware supervision, format-conditional co-training, and mechanism-conditioned domain-to-type decoding to make APT learning format-robust and physically grounded. With only 11 M LoRA parameters on Qwen3-VL-2B, APT-Tune substantially improves APT recall while also improving event-level video transfer. These results show that APTs are not a new answer format, but a human-aligned causal supervision signal for physical video understanding.

Language discrimination among similar languages, varieties, and dialects is a challenging natural language processing task. The traditional text-driven focus leads to poor results. In this paper, we explore the effectiveness of speech-driven features towards language discrimination among Chinese dialects. First, we systematically explore the appropriateness of speech-driven MFCC features towards CNN-based language discrimination. Then, we design an end-to-end speech recognition model based on HMM-DNN to predict Chinese dialect words. We adopt attention to extract the discriminative words related to different Chinese dialects. Finally, through a CNN, we combine the word-level embedding and the MFCC-based features. Evaluation of two benchmark Chinese dialect corpora shows the appropriateness and effectiveness of the proposed speech-driven approach to fine-grained Chinese dialect discrimination compared to the state-of-the-art methods.

LiDAR place recognition determines one's position on a prior point cloud map. The most studied ground-level LiDAR place recognition suffers from pre-visit requirements, incomplete coverage, and limited perspectives. Using pre-acquired, full-coverage Airborne Laser Scanning (ALS) data as an aerial prior map overcomes these drawbacks, making cross-view place recognition necessary and advantageous. However, aerial-ground LiDAR place recognition faces significant challenges, including the domain gap between aerial and ground point clouds, and false positives during initial retrieval. To address these challenges, we present a novel retrieval and re-ranking framework for aerial-ground LiDAR place recognition. Based on the priors that neighboring point cloud patches share similar semantics with anchor patch, our retrieval network introduces patch-level self-supervised learning modules at multiple scales and integrates with scene-level learning to improve global feature discriminativeness between aerial and ground point clouds. Furthermore, leveraging the structured spatial distribution of ALS point clouds, we introduce an Expanded Reciprocal (ER) re-ranking algorithm to exploit neighborhood information maximally and refine each feature based on neighbor features, which are then used to update the similarity matrix for final ranking. Extensive experiments demonstrate that our retrieval network outperforms existing state-of-the-art (SOTA) methods, achieving a 9.8\% improvement in average Recall@1 and a 3.2\% improvement in average Recall@1\% on the CS-Urban-Scenes, while also showing the best performance on the CS-Campus3D dataset. Additionally, our ER re-ranking algorithm further boosts the average Recall@1 by 4.9\% on CS-Campus3D and 10.2\% on CS-Urban-Scenes without additional training.

The GOOSE 2D Fine-Grained Semantic Segmentation Challenge at the ICRA 2026 Workshop on Field Robotics evaluates dense semantic segmentation of off-road imagery over a fine-grained taxonomy of 64 classes and 11 evaluated non-void coarse categories. We present the first-place solution to this challenge. Our solution comprises two complementary improvements: (a) a network-level design that combines a self-supervised DINOv3 ViT-L/16 backbone, a ViT-Adapter, and a Mask2Former mask-classification decoder, together with a coarse-category auxiliary loss on the global [CLS] token; and (b) an inference-time aggregation strategy based on multi-scale and horizontal-flip test-time augmentation and an ensemble of the top three checkpoints selected using Codabench scores. Our method achieves an official composite score of 76.57%, consisting of 69.32% fine-class mIoU and 83.81% category-level mIoU, and ranks first on the final phase leaderboard: www.codabench.org/competitions/14257/#/results-tab.

Mild Cognitive Impairment (MCI) is a medical condition characterized by a noticeable decline in memory, language, or thinking abilities. MCI detection from spontaneous speech is promising for scalable screening. However, learned models often exploit demographic cues correlated with labels, resulting in a large performance gap across subgroups. We present a multimodal framework that combines (i) cross-model fusion between modalities (speech, text, and image), and (ii) unlearning using gradient reversal that discourages the shared embedding from encoding task-irrelevant demographic attributes. Evaluated on the multilingual benchmarks TAUKADIAL and PREPARE, our method outperforms the state-of-the-art multilingual and multimodal baseline in MCI classification while substantially reducing the performance gap across patient subgroups (sex and language). We further analyze transfer across datasets, showing that demographic unlearning helps learn more robust representations for MCI detection.

Crowd counting is a fundamental task in computer vision. However, crowd counting in low-light environments remains largely underexplored, despite its practical importance in the real world. Existing methods mainly focus on well-lit scenes or rely on single-modality Red-Green-Blue (RGB) representations, which often become unreliable under extreme darkness and complex non-uniform illumination. To handle this problem, we construct three new low-light crowd counting benchmarks, which consist of two synthetic datasets, SHA\_Dark and SHB\_Dark, and a real-world benchmark LC-Crowd (Low-light Crowd Dataset). Inspired by Retinex-based physical modeling, we introduce depth and Canny edge cues as complementary geometric and structural priors to enhance the intrinsic reflectance representation under low-light conditions. We propose a Multi-Modal Hyper-Graph Fusion module, which formulates RGB appearance, depth geometry, and edge structure cues as nodes in a unified hyper-graph and explicitly captures their high-order complementary relationships via dynamic hyperedge construction and message passing. Furthermore, to adaptively allocate computation in dense prediction, we propose a Deformable Rectangular Sparse Attention (DRSA) module, which concentrates computation on informative regions through anchor-aware estimation and adaptive rectangular window modeling. Based on these designs, we develop a unified Low-Light Counting Network (LCNet) for robust low-light crowd counting. Extensive experiments on three benchmarks demonstrate that the proposed method achieves the best overall performance against existing state-of-the-art (SOTA) methods. The code is in the supplementary material. The datasets will be made public upon acceptance.

An experimental investigation of neural image classification on the CIFAR-10 benchmark is presented through fully connected and convolutional network formulations. The analysis emphasizes the complete learning pipeline: image vectorization, normalization, one-hot class encoding, supervised loss minimization, learning-rate selection, mini-batch training, convolutional feature extraction, max-pooling, and validation-based generalization assessment. A convolutional architecture with six convolutional layers and three max-pooling stages is evaluated for ten training epochs using a batch size of 128 and an Adam optimizer with a learning rate of 0.001. The validation accuracy reaches approximately 74.77%, while the validation loss begins to increase after the middle of training despite continued reduction in training loss. The resulting behavior illustrates the practical difference between representation learning and memorization, and it provides a compact experimental baseline for future studies on regularization, data augmentation, deeper architectures, and reproducible image-classification education.

Reference-based adaptive interference cancellation is evaluated for stereo audio recordings corrupted by real train noise and environmental background. The observed signal is modeled as a clean stereo program contaminated by an additive disturbance generated by an external acoustic source through unknown propagation paths. A second stereo recording, representing another filtered observation of the same physical noise source, is used as the reference input of a multi-reference recursive least-squares (RLS) estimator. The estimated train-interference component is subtracted from the noisy audio and followed by a finite-impulse-response low-pass postfilter. Three 74.01 s real audio sequences sampled at 11.025 kHz are processed under identical algorithmic parameters. Since clean ground truth is not available, performance is assessed with no-reference indicators: waveform behavior, Welch spectral estimates, RMS change, and residual normalized correlation with the reference. With 30 taps per reference channel, 15 anti-causal taps, and forgetting factor 0.999, the maximum reference correlation is reduced from 0.386--0.832 before processing to 0.011--0.016 after processing. The corresponding correlation-ratio reduction is approximately 30.6--34.1 dB, while the output RMS decreases by 1.8--4.8 dB depending on section and stereo channel. The results demonstrate that real train interference, including environmental acoustic effects, can be substantially attenuated when a correlated reference recording is available.

The quality of recorded data depends on the stability of the sensor system that acquires it. Sensor motion and aging can degrade the performance and stability of downstream data-driven methods. We present a Wasserstein-GAN-inspired approach for unsupervised inference of physically interpretable transformation parameters that map a changed detector response distribution back to a nominal reference distribution. In contrast to standard generative modeling, the generator is used as a learnable calibration transformation whose trainable weights represent the sought parameters, while the critic provides a distributional distance signal via the Wasserstein objective. We validate the approach on a tracking-detector toy model with controlled layer shifts and demonstrate its application on high-granularity Geant4-simulated calorimeter data with cell-wise aging effects. The method recovers aging coefficients for individual cells with correlation to ground truth and improves agreement between calibrated and reference energy-sum distributions, while exhibiting the expected degradation at increasing channel-to-channel noise levels. These results indicate that adversarial distribution matching can serve as a data-driven component of calibration strategies in settings where direct labels for degradation parameters are unavailable.

Few-shot adaptation of pretrained Audio--Language Models (ALMs) often improves seen-class performance at the cost of unseen-class generalization, leading to the base-to-new trade-off. We attribute this failure to zero-shot drift in the text embedding space: few-shot tuning can distort inter-class structure and move adapted embeddings far from their pretrained anchors. We therefore propose Subspace Tuning (SubT), a geometry-constrained adaptation framework with two complementary controls on drift. Structured Subspace Parameterization limits structural deformation, and Residual Anchoring stabilizes adaptation around the zero-shot prior. At inference time, Subspace-aware Gating further suppresses negative transfer for weakly aligned unseen classes. Across 11 audio benchmarks, SubT delivers strong few-shot generalization while remaining efficient, operating directly on precomputed text embeddings without text-encoder backpropagation.

Motion forecasting is central to visual intelligence: agents must anticipate how objects will move in order to plan actions, reason about physical interactions, and synthesize realistic futures. We argue that 3D points in world coordinates provide a general representation that is class-agnostic, view-stable, compact, and directly useful for downstream tasks. We formalize the task of goal-conditioned 3D point motion forecasting: given a short visual history, a set of 3D query points on an object of interest, and a language description of the intended goal, the model predicts the future 3D trajectory of each point. We introduce a full stack to study this task at scale: (1) MolmoMotion-1M is a large corpus of action-described, object-grounded 3D point trajectories annotated from 1.16M unconstrained videos; (2) PointMotionBench is a human-verified benchmark spanning 111 object categories and 61 motion types; and (3) MolmoMotion is a general motion forecasting model that supports both autoregressive coordinate prediction and flow-matching-based trajectory generation. MolmoMotion accurately predicts diverse motion patterns with different language instructions, and significantly outperforms existing motion prediction baselines on PointMotionBench. Finally, we show that the learned 3D motion prior transfers well to downstream applications: it improves training efficiency and generalization for robot manipulation, and its predicted trajectories provide effective motion guidance for generative models to synthesize videos with more realistic object motion.

A rule-based logic solver resolves every instance in our benchmark in under 50 microseconds with 100% accuracy; the best frontier language model reaches 65% at best and drops to 23.5% under rendering-robust evaluation (worst case over four surface renderings). We introduce DeFAb (Defeasible Abduction Benchmark), a dataset and generation pipeline that converts four decades of publicly funded knowledge bases into formally grounded instances for defeasible abduction: constructing hypotheses that explain anomalies by overriding defaults while preserving unrelated expectations. Because every hypothesis must pass polynomial-time checks for valid derivation, conservativity, and minimality, DeFAb makes logical rigor the instrument for measuring creativity and theoretical reasoning, scoring the disciplined construction of theory revisions rather than fluent but theory-destroying prose. The pipeline pairs taxonomic hierarchies (OpenCyc, YAGO, Wikidata) with behavioral property graphs (ConceptNet, UMLS) to produce 372,648+ instances across 33.75M materialized rules from 18 sources, in three levels with polynomial-time verifiable gold standards. Four frontier models do not reliably internalize defeasible reasoning: rendering-robust Level 2 accuracy is 7.8-23.5%; chain-of-thought variance (~36 pp) exceeds any inter-model gap; and a matched contamination control isolates a +19.4 pp Level 3 gap. We further release DeFAb-Hard (a 235-instance Level 3 difficulty variant; best model 53.3% vs 100% symbolic) and CONJURE (a kernel-verified transformative-creativity variant of 560 Lean 4/Mathlib instances whose gold answers are definitions the proof kernel did not previously contain, judge-free verifier; a pilot finds zero novel concepts). The same verifier doubles as an exact reward for preference optimization (DPO, RLVR/GRPO). Released under MIT at https://huggingface.co/datasets/PatrickAllenCooper/DeFAb.

In the realm of computer vision, indoor image recognition presents challenges due to the intricate interplay of lighting conditions, occlusions, and diverse object arrangements within confined spaces. To address the lacks of training indoor images, we introduce a novel approach leveraging Stable Diffusion (SD) for the generation of synthetic images, which serve as a powerful data augmentation tool. The utilization of SD offers a principled framework for synthesizing diverse and realistic indoor scenes, thereby enriching the training data pool for robust indoor image recognition models. Experimental findings on the MIT Indoor Scene dataset reveal the potential of our proposed approach in enhancing the training of deep models when authentic data is limited. Furthermore, to prevent the misuse of SD synthetic images, we introduce a counter measure based on DIffusion Reconstruction Error (DIRE). The powerful DIRE presentation enables training robust classifiers only using lightweight deep models. Experiments show that our approach can perfectly recognize SD generated images with the accuracy of 100% using MobilenetV3.