As a critical component of sixth-generation (6G) wireless networks, ultra-reliable and low-latency communication (URLLC) is expected to support real-time and reliable information exchange in low-altitude environments. However, achieving URLLC often incurs significant resource overhead, including increased bandwidth consumption, higher transmit power, and denser access point (AP) deployment, which pose significant challenges to both spectral efficiency (SE) and energy efficiency (EE). Besides, existing iterative optimization algorithms are computationally intensive and struggle to meet the latency requirements of URLLC. To address these challenges, we propose a hybrid aerial-terrestrial cell-free massive MIMO (CF-mMIMO) network to support diverse services, along with a channel prediction network and a deep mixture of experts (MoE) network for uplink optimization. First, we design a channel prediction network (CP-Net) to mitigate channel aging caused by high-mobility user equipment (UE). CP-Net employs three Transformer-based sub-networks for aged channel state information (CSI) prediction, while a channel quality-aware loss function is introduced to improve the prediction accuracy of weak links. Based on the predicted CSI, we develop a deep MoE network (MoE-Net) for power allocation comprising three expert models targeting different objectives. Then, we introduce a weighted gating network (WT-Net) to learn an efficient adaptive combination of expert outputs. The proposed framework better captures heterogeneous UE requirements and improves communication performance under URLLC constraints. Numerical results demonstrate the effectiveness of the proposed method.

Robust state estimation for highly dynamic motion of legged robots remains challenging, especially in dynamic, contact-rich scenarios. Traditional approaches often rely on binary contact states that fail to capture the nuances of partial contact or directional slippage. This paper presents CoCo-InEKF, a differentiable invariant extended Kalman filter that utilizes continuous contact velocity covariances instead of binary contact states. These learned covariances allow the method to dynamically modulate contact confidence, accounting for more nuanced conditions ranging from firm contact to directional slippage or no contact. To predict these covariances for a set of predefined contact candidate points, we employ a lightweight neural network trained end-to-end using a state-error loss. This approach eliminates the need for heuristic ground-truth contact labels. In addition, we propose an automated contact candidate selection procedure and demonstrate that our method is insensitive to their exact placement. Experiments on a bipedal robot demonstrate a superior accuracy-efficiency tradeoff for linear velocity estimation, as well as improved filter consistency compared to baseline methods. This enables the robust execution of challenging motions, including dancing and complex ground interactions -- both in simulation and in the real world.

Data-dependent secondary transforms, which aim to decorrelate coefficients of a separable primary transform, can improve residual coding efficiency; however, their deployment is often constrained by computational complexity. Recent video codecs use variants of the low-frequency non-separable transform (LFNST), which discards some high-frequency secondary transform coefficients, limiting achievable coding gains. Moreover, existing data-dependent secondary transforms lack explicit rate-distortion (RD) optimal design criteria. In this work, we propose a framework for designing low-complexity data-dependent secondary transforms, termed Fast Sparsifying Secondary Transforms (FaSSTs). Our approach approximates data-driven sparse orthonormal transforms (SOTs) by factorizing them into a sequence of Givens rotations. The rotations are efficiently determined using an alternating minimization strategy combined with an approximate Givens factorization procedure. Our method adapts the number of rotations based on the prediction mode, further reducing computational complexity. We design mode-dependent secondary transforms for intra-prediction residuals in AV2 using FaSST. Experimental results show that mode-adaptive FaSST matches the RD performance of LFNST while reducing the number of computations by 83.67%. Moreover, by avoiding fixed-coefficient truncation, FaSST achieves up to 1.80% BD-rate savings relative to LFNST while operating at 66.24% lower complexity.

This paper presents a prototyping framework for distributed control of multi-robot systems, aimed at bridging theory and practical testing of distributed optimization algorithms. Using the Single Program, Multiple Data (SPMD) paradigm, the framework emulates distributed control on a single computer, with each core running the same algorithm using local states and neighbour-to-neighbour communication. We demonstrate the framework on a four-quadrotor position-swapping task using a non-cooperative game-theoretic distributed algorithm. Computational time and trajectory data are compared across the supported dynamics levels: a point-mass model, a high-fidelity quadrotor model, and an experimental hardware testbed using Crazyflie quadcopters. The results show that the framework provides a low-cost and accessible approach for validating distributed algorithms.

As audio-first agents become increasingly common in physical AI, conversational robots, and screenless wearables, audio large language models (audio-LLMs) must integrate speaker-specific understanding to support user authorization, personalization, and context-aware interaction. This requires modeling who is speaking, how the voice sounds, and how recording conditions affect speaker cues. Conventional speaker verification systems provide strong scalar scores but little linguistic evidence, while current audio-LLMs and speaker-aware language models have limited ability to organize speaker information beyond binary labels or descriptive profiles. We present SpeakerLLM, a speaker-specialized audio-LLM framework that unifies single-utterance speaker profiling, recording-condition understanding, utterance-pair speaker comparison, and evidence-organized verification reasoning within a natural-language interface. We construct verification-reasoning targets and a decision-composition policy that separate profile-level evidence from the final same-or-different decision and organize recording condition, profile evidence, and the decision into a structured trace. At its core, SpeakerLLM uses a hierarchical speaker tokenizer designed to capture multiple granularities of speaker evidence. Utterance-level speaker embeddings summarize identity and profile-level cues, whereas frame-level speaker features preserve fine-grained acoustic descriptors. Experiments show that SpeakerLLM-Base improves speaker-profile and recording-condition understanding over general audio-LLMs, while SpeakerLLM-VR preserves strong generated-verdict accuracy and produces decision traces grounded in the supervised verification reasoning schema. We will release the metadata-enriched supervision dataset and target-construction code for reproducibility.

Intelligent Reflecting Surfaces (IRSs) are a promising technology for enhancing the spectral and energy efficiency of millimeter-wave (mmWave) multiple-input multiple-output (MIMO) systems. In these systems, accurate channel estimation remains challenging due to the passive nature of IRS elements and the high pilot overhead in large-scale deployments. This paper presents a deep learning-based Multi-Block Attention (MBA) framework for efficient cascaded channel estimation in IRS-assisted mmWave MIMO systems that utilize orthogonal frequency division multiplexing (OFDM). First, we show the optimality of the discrete Fourier transform (DFT) and Hadamard matrices as phase configurations for least squares (LS) estimation. To reduce training overhead, we selectively deactivate IRS elements and compensate for induced feature loss using a two-stage architecture: (i) a Convolutional Attention Network (CAN) for spatial correlation recovery and (ii) a Complex Multi-Convolutional Network (CMN) for noise suppression. The MBA architecture mitigates error propagation through attention-guided feature refinement and denoising. Simulation results indicate that the MBA method reduces pilot overhead by up to 87% compared to the LS estimator. Additionally, at signal-to-noise ratios of 10 dB, our proposed method achieves approximately 51% lower normalized mean squared error (NMSE) than leading methods. It also maintains low computational complexity and adapts effectively to various propagation environments.

Angle power spectrum (APS) characterizes the directional distribution of received signal power and is directly relevant to beam management and MIMO processing. While environment-aware learning has been widely studied for radio maps and path loss, direct map-to-APS prediction still lacks a standardized large-scale benchmark. This paper presents Map2APS, a physically grounded benchmark constructed from intelligent ray-tracing (IRT) path-level propagation records. Map2APS covers 51 equal-height urban maps and approximately 2.55 million Tx--Rx samples, with a strict cross-map split for evaluating generalization to unseen urban layouts. We benchmark representative model families and introduce MS-AReg as a strong reference baseline. On the full held-out test set of 249{,}993 samples, MS-AReg achieves a cosine similarity of 0.948, a peak location error of 1.20$^\circ$, and an inference latency of 0.101 ms/sample. We further report dominant-direction metrics, including Top-1 dominant peak hit rate and dominant peak recall, to evaluate whether predicted spectra preserve decision-relevant arrival directions. The benchmark, code, and evaluation scripts are released at https://github.com/UNIC-Lab/aps-data.

We study the remote estimation of a linear Gaussian system over a channel that wears out over time and with every use. The sensor can either transmit a fresh measurement in the current time slot, restore the channel quality at the cost of downtime, or remain silent. Frequent transmissions yield accurate estimates but incur significant wear on the channel. Renewing the channel too often improves channel conditions but results in poor estimation quality. What is the optimal timing to transmit measurements and restore the channel? This problem is formulated as a semi-Markov decision process (SMDP). We establish monotonicity properties of the optimal policy and propose structure-aware solution methods.

Carotid atherosclerosis is a major contributor to ischemic stroke and transient ischemic attack. Conventional ultrasound assessment is commonly based on intima-media thickness, plaque appearance, stenosis degree, and peak systolic velocity, but these morphology- and velocity-based indicators may not fully capture patient-specific vascular risk. This study presents AtheroFlow-XNet, a CUBS-compatible ultrasound morphology and uncertainty-aware learning baseline for carotid intima-media segmentation and preliminary risk prediction. Using the Carotid Ultrasound Boundary Study dataset, manual lumen-intima and media-adventitia boundary annotations were converted into dense intima-media masks for supervised segmentation. Clinical variables were incorporated into an auxiliary risk-prediction branch, and Monte Carlo dropout was used for uncertainty-aware inference. The model was evaluated using a patient-level train-validation-test split with 1,522 training images, 326 validation images, and 328 testing images. The proposed model achieved a Dice coefficient of 0.7930 for LI-MA mask segmentation, a segmentation loss of 0.2359, and an area under the receiver operating characteristic curve of 0.6910 for preliminary risk prediction. Qualitative results showed that predicted masks were generally aligned with manual annotations, while uncertainty maps highlighted ambiguous wall-boundary regions. These results suggest that ultrasound-derived carotid morphology can support automated wall analysis and uncertainty-aware interpretation. Since CUBS does not provide Doppler waveforms or CFD-derived hemodynamic biomarkers, this work should be interpreted as a reproducible morphology-driven baseline. Future work will incorporate Doppler-derived flow profiles, patient-specific vascular reconstruction, and CFD-based wall shear biomarkers.

The study addresses the problem of quadcopter motion control using output feedback. By applying a geometric approach, the quadcopter model is transformed into a normal form with a time-varying gain coefficient, which is subsequently made stationary through double integration of the control input. A robust output feedback control law is synthesised based on the extended observer method.

With the growth of the construction industry and the global shortage of skilled labor, the automation of crane control has become increasingly important for safe and efficient operations. A central challenge in automatic crane control is the reduction of load oscillations during motion, which is primarily addressed through appropriate slewing trajectories. In this context, classical model-based control methods rely on accurate dynamical models and expert tuning, and often struggle to meet safety and precision requirements, while many learning-based approaches require large data sets and significant computational resources. This paper proposes a behavioral data-driven framework for generating open-loop slewing trajectories for rotary cranes that suppress load sway while reducing operation time and energy consumption. The approach builds on Willems' fundamental lemma and its generalizations, to bypass explicit system modeling and operate directly on measured input-output data. A practical workflow is presented in this paper to reduce the need for expert knowledge. Despite the underactuated nature of the crane dynamics, the method identifies a nonparametric representation of the system behavior and generates smooth, optimal trajectories using limited data and convex optimization. The proposed trajectory generation method is validated on a laboratory crane setup and compared against an established model-based approach, achieving up to 35% reduction in load sway, 43% reduction in tracking error, and 50% reduction in travel time.

The use of mobile robotics in radioactive source seeking has become an important part of modern radiation-safety practices, supporting timely mitigation of contamination risks and helping protect public health. However, measuring radiation is often time-consuming, rendering traditional gradient-based source-seeking methods less effective due to lower sample efficiency. This paper proposes a sample-efficient Bayesian-Optimisation source-seeking strategy that utilises a heteroscedastic Gaussian process surrogate to balance exploration and exploitation. Excessive inter-sample travel is discouraged through a movement switching cost. The strategy is shown to generate sublinear regret in the source-seeking task, while simulations demonstrate its effectiveness in localising radioactive sources.

Electroencephalogram (EEG) signals are highly susceptible to artifacts, resulting in a low signal-to-noise ratio which makes extraction of meaningful neural information challenging. Artifact Subspace Reconstruction (ASR) is one of the most widely used artifact filtering techniques in EEG-based BCI applications, owing to its real-time applicability. ASR reconstructs artifact-free signals by operating in Principal Component (PC) space within sliding windows. However, ASR performance is critically sensitive to its threshold parameter - an incorrect threshold risks removing task-relevant neural features alongside artifacts. Furthermore, since PCs are linear combinations of all channels, subspace reconstruction in PC space may alter the underlying data structure, potentially discarding essential neural information. To address these limitations, we propose nASR, a novel end-to-end trainable Keras layer that jointly optimizes artifact rejection and downstream decoding. nASR introduces two trainable threshold parameters: K, which governs artifact detection in PC variance space, and L, which quantifies eigen-spread to pinpoint the primary artifact--contributing channels, enabling selective channel-level reconstruction that preserves clean channel information. An ablation study comprising five model variants (m01 - m05), evaluated across two subjects from the BCI Competition IV Dataset 1, confirms that nASR variants consistently outperform traditional ASR on test classification metrics, while achieving a 6-8x reduction in inference time, making nASR a strong candidate for real-time BCI applications demanding both low latency and high decoding performance.

Semantic communication systems for goal-oriented transmission must protect task-relevant information not only through source compression but also via physical layer mapping. Existing approaches decouple constellation design and semantic encoding, exposing critical symbols to channel errors at the same rate as irrelevant ones. Contrary to this, in this paper, a joint semantic-physical layer framework is proposed, which is composed of a vector quantized-variational autoencoder that extracts discrete latent concepts, a semantic criticality indicator (SCI) that scores each concept by task relevance, and a deep reinforcement learning agent that dynamically selects the transmission subset based on instantaneous channel conditions. At the physical layer, a learned semantic-aware M -QAM constellation assigns symbol positions according to joint co-occurrence statistics and SCI scores, departing from the uniform spacing and Gray coding of standard M -QAM which minimizes average BER without regard for semantic content. We introduce a novel semantic symbol vulnerability (SSV) metric and a semantic protection probability (SPP) to quantify the exposure of task-critical symbols to decoding errors, and prove that any Gray-coded constellation is strictly suboptimal in SCI-Weighted SSV whenever the source exhibits non-uniform semantic importance and co-occurrence statistics. Simulation results demonstrate that the proposed constellation achieves near 100% SPP across modulation orders from 4-QAM to 1024-QAM versus 50% for standard constellations at high spectral efficiency, a 21:1 compression ratio with semantic quality above 0.9, generalizing across MNIST, Fashion-MNIST, and FSDD without modification.

Transmit beamforming for underwater acoustic communication is challenging because it requires perfect knowledge of the channel to the receiver in advance. In practice, channel estimates must be learned through feedback and are often noisy or outdated because of feedback delay and channel variation. In this paper, we investigate angle-based beamforming strategies for a single-user link that reduce dependence on full channel knowledge by exploiting stable components of the geometric structure in the propagation field. In particular, we focus on scenarios in which there exists a dominant path that remains relatively stable over time, making it a suitable candidate for transmit beamforming. Experimental results using the SPACE and MACE data sets demonstrate the effectiveness of the proposed method in terms of data-detection mean-squared error and bit error rate.

Mild traumatic brain injury (mTBI) is a prevalent condition that remains difficult to diagnose in its early stages. Oculomotor dysfunction is a well-established marker of mTBI, motivating the development of portable tools that capture both eye-movement behavior and underlying neurophysiology. In this work, we present an initial framework that integrates electroencephalogram (EEG) with augmented-reality (AR)-based Vestibular/Ocular Motor Screening (VOMS) tasks to estimate subject-specific ocular response times. Pre-processed EEG signals, obtained through band-pass filtering and average referencing, are analyzed using a Redundant Discrete Wavelet Transform (RDWT)-driven deep neural framework. The RDWT coefficients are subjected to trainable zero-phase convolutional filtering and reconstructed into the time domain via inverse RDWT, followed by channel-wise temporal and spatial filtering using 2D convolution layers and convolutional-LSTM-based decoding. An ablation study demonstrates that wavelet-domain filtering serves as an effective denoising strategy, improving prediction performance. Sliding-window predictions were validated using Pearson correlation (>= 0.5), and Dynamic Time Warping (DTW) was subsequently used to estimate ocular response times. DTW-derived metrics revealed significant inter-subject differences across all VOM tasks, supported by Mann-Whitney U tests. Cross-correlation analysis further revealed task-dependent temporal behaviors: pursuit tasks exhibited reactive tracking, whereas saccades showed anticipatory responses. Overall, the results highlight pursuit tasks as particularly informative for distinguishing timing differences and demonstrate the potential of RDWT-based EEG features combined with DTW metrics for multimodal mTBI assessment.

Forecasting within signal processing pipelines is crucial for mitigating delays, particularly in predicting the dynamic movements of objects such as NBA players. This task poses significant challenges due to the inherently interactive and unpredictable nature of sports, where abrupt changes in velocity and direction are prevalent. Traditional approaches, including (S)ARIMA(X), Kalman filters (KF), and Particle filters (PF), often struggle to model the non-linear dynamics present in such scenarios. Machine learning (ML) methods, such as long short-term memory (LSTM) networks, graph neural networks (GNNs), and Transformers, offer greater flexibility and accuracy but frequently fail to explicitly capture the interplay between temporal dependencies and contextual interactions, which are critical in chaotic sports environments. In this paper, we evaluate these models and assess their strengths and weaknesses. Experimental results reveal key performance trade-offs across input history length, generalizability, and the ability to incorporate contextual information. ML-based methods demonstrated substantial improvements over linear models across forecast horizons of up to 2s. Among the tested architectures, our hybrid LSTM augmented with contextual information achieved the lowest final displacement error (FDE) of 1.51m, outperforming temporal convolutional neural network (TCNN), graph attention network (GAT), and Transformers, while also requiring less data and training time compared to GAT and Transformers. Our findings indicate that no single architecture excels across all metrics, emphasizing the need for task-specific considerations in trajectory prediction for fast-paced, dynamic environments such as NBA gameplay.

Traditional methods for classifying global navigation satellite system (GNSS) jamming signals typically involve post-processing raw or spectral data streams, requiring complex and costly data transmission to cloud-based interference classification systems. In contrast, our proposed approach efficiently compresses GNSS data streams directly at the hardware receiver while simultaneously classifying jamming and spoofing attacks in real time. Given the growing prevalence of GNSS jamming, there is a critical need for real-time solutions suitable for power-constrained environments. This paper introduces a novel method for compressing and classifying GNSS jamming threats using generative artificial intelligence (GenAI), specifically variational autoencoders (VAEs), deployed on Google Edge tensor processing units (TPUs). The study evaluates various autoencoder (AE) architectures to compress and reconstruct GNSS signals, focusing on preserving interference characteristics while minimizing data size near the receiver hardware. The pipeline adapts large-scale AE models for Google Edge TPUs through 8-bit quantization to ensure energy-efficient deployment. Tests on raw in-phase and quadrature-phase (IQ) data, Fast Fourier Transform (FFT) data, and handcrafted features show the system achieves significant compression (>42x) and accurate classification of approximately 72 interference types on reconstructed signals (F2-score 0.915), closely matching the original signals (F2-score 0.923). The hardware-centric GenAI approach also substantially reduces jammer signal transmission costs, offering a practical solution for interference mitigation. Ablation studies on conditional and factorized VAEs (i.e., FactorVAE) explore latent feature disentanglement for data generation, enhancing model interpretability and fostering trust in machine learning (ML) solutions for sensitive interference applications.

Affine frequency division multiplexing (AFDM) has recently emerged as a promising waveform for high-mobility communications due to its resilience to Doppler effects and its advantages for integrated sensing and communication (ISAC). AFDM modulates transmit data symbols using chirp subcarriers with two adjustable parameters. One is used for dealing with the Doppler effect and the second parameter can be used for physical layer security (PLS). In this paper, we focus on designing the second chirp parameter in the form of a generic phase function to enhance the robustness of the waveform against brute-force demodulation by the eavesdropper. In particular, we first derive a design criterion that reveals the brute-force demodulation complexity depends on the first derivative of the phase function. Then, we introduce a family of phase functions that can increase the brute-force demodulation complexity in an unbounded and controllable manner, while preserving chirp structure of AFDM. Our simulation results demonstrate that the proposed phase function design enhances the PLS performance of AFDM by several orders of magnitude compared with the conventional AFDM in terms of brute-force demodulation complexity.

Large-scale chemical plants rely on distributed process control systems (PCS) comprising numerous processing units, communication modules, and I/O devices interconnected via industrial networks. The design of a cost-efficient and reliable hardware architecture under partial uncertainty in plant parameters remains a challenging combinatorial optimization problem. This paper proposes a formal model for distributed control system hardware architecture synthesis. A hybrid ant colony-based metaheuristic framework is developed to construct feasible hierarchical architectures. The proposed approach is validated on a large-scale sulfuric acid plant control system case study. Plant parameters are identified from operational data, system stability is analyzed, and a controller synthesis is performed based on the optimized architecture. The results demonstrate the feasibility of the approach and confirm that the obtained architecture satisfies structural and dynamic performance requirements.

Normally, a system that translates speech into text consists of separate modules for speech recognition and text-to-text translation. Combining those tasks into a SpeechLLM promises to exploit paralinguistic information in the speech and to reduce cascaded errors. But existing SpeechLLM systems are slow since they do not work in a real streaming fashion: they wait for a complete utterance of audio before outputting a translation, or output tokens at fixed intervals, which is not suitable for real applications. This work proposes an LLM-based architecture for real streaming speech-to-text translation. The LLM learns not just to emit output tokens, but also to decide whether it has seen enough audio to do so. The system is trained using automatic alignments of the input speech and the output text. In experiments on different language pairs, the system achieves a translation quality close to the non-streaming baseline, but with a latency of only 1-2 seconds.

Electrified chemical processes are incentivized by exposure to time-varying electricity markets to operate flexibly, but participating in demand response schemes can require satisfying terminal constraints over long horizons. Specifically, terminal constraints may be required when computing optimal schedules in order to preserve dynamic stability. Model-based optimization methods are computationally costly, and data-driven scheduling via reinforcement learning (RL) faces severe credit-assignment challenges. We integrate Goal-Space Planning (GSP) with Deep Deterministic Policy Gradient (DDPG), using learned temporally abstract models over discrete subgoals to propagate value across extended horizons. Using a simulated air separation benchmark, we demonstrate the proposed approach improves sample efficiency over standard DDPG while satisfying terminal storage constraints, mitigating myopic control behavior.

This paper investigates the effect of oscillator phase noise in orthogonal time frequency space (OTFS) systems. The paper provides in-depth analysis of the interference due to phase noise in the delay-Doppler domain and derives expressions for SINR for three different oscillator types, namely free-running oscillators, continuous-time phase locked loops (PLLs) and discrete-time PLLs. The analysis demonstrates the OTFS is sensitive to phase noise and requires appropriate estimation and compensation. In particular, the analysis shows phase noise imposed inter-Doppler-interference (IDI) is severe and that existing phase noise estimation techniques which only consider the common-phase-error (CPE) can not compensate this IDI effectively. Additionally, the existing methods in the OTFS literature on phase noise assume the channel to be a known single tap channel. Hence, in this paper, we propose a method for joint channel and phase noise estimation using a Wiener filtering approach. Our proposed method exploits the statistical nature of both the phase noise and the Doppler spread channel. Our numerical results demonstrate the superior performance of our proposed technique, with gains of up to 8~dB in terms of bit error rate (BER) over existing methods in the literature.

This paper addresses the dynamic event-triggered control for a class of discrete-time nonlinear systems described by a difference-algebraic representation (DAR), using a gain-scheduled controller. An outstanding aspect of the proposed method is the incorporation of information about the system's nonlinearities into the control law and the trigger function. The proposed event-triggered mechanism also incorporates information on the asynchronous terms induced by the event-based sampling. All these ingredients enable the derivation of a less conservative co-design condition for the simultaneous design of the gain-scheduled control law and the dynamic triggering mechanism to ensure the asymptotic stability of the closed-loop system. An estimate of the region of attraction of the origin of the closed-loop system is obtained to guarantee the closed-loop system's operation within the domain of validity of the DAR. Then, an optimization problem is formulated to reduce the number of events and enlarge the estimated region of attraction. Finally, the effectiveness of the proposed condition is illustrated by a numerical example.

High-resolution seafloor mapping necessitates stable and precise positioning for underwater robots. This paper introduces a novel mathematical model for SeaVis remotely operated towed vehicles (ROTVs) and develops a gain-scheduled linear-quadratic regulator (LQR) for robust depth and attitude control. We validate the approach in a high-fidelity simulation, benchmarking the LQR against a conventional PID controller over a challenging seabed profile. The presented results demonstrate the LQR's superior performance, with significantly enhanced robustness to disturbances, greater control efficiency, and substantially reduced flap actuation. The gain scheduling also confirms the controller's effectiveness across the full operational velocity range. The complete simulation environment and controller are open-sourced.

Underwater images suffer from severe wavelength-dependent light absorption and scattering, and turbidity due to suspended particles, degrading visual quality for applications in autonomous underwater vehicles (AUVs), marine biology, archaeology, and offshore infrastructure inspection. Classical IFM inadequately capture nonlinear underwater light behavior, while purely data-driven methods lack physical interpretability. This paper proposes a three-stage network named ADR, that extends the underwater image formation model with additional terms to perform underwater dehazing, followed by Retinex-based enhancement and attention-enabled U-Net++ refinement. Experiments on UIEB and UFO-120 benchmark datasets demonstrate competitive performance with state-of-the-art methods.

Accurate beam prediction is essential for mitigating signalling overhead and latency in integrated sensing and communication-enabled massive multi-input multi-output systems. With the aid of multimodal learning, the prediction accuracy can be enhanced by leveraging the complementary information from other existing sensors, but the practical deployment is often constrained by the high cost of acquiring semantically aligned multimodal datasets. This paper proposes a variational-inference-based multimodal framework that decouples the optimization problem into modular feature extraction and cross-modal semantic alignment. Specifically, we develop a two-stage training strategy where the model utilises abundant unimodal data for representation learning before performing refined alignment on limited multimodal samples. This design enhances data efficiency and ensures robust feature fusion under sensing uncertainties. Experimental results on the DeepSense6G dataset demonstrate that the proposed framework achieves competitive beam prediction accuracy and maintains high reliability, while only requiring 20% of the multimodal training data compared to conventional end-to-end benchmarks.

This paper presents a distributionally robust model predictive control (DRMPC) framework for the optimal Virtual Power Plant (VPP) operation under electricity price uncertainty. A unified VPP model is formulated that captures the interaction between buildings, battery storage, and renewable generation, all influenced by exogenous weather and market signals. The proposed approach integrates data-driven forecasting with quantile-based uncertainty quantification to construct time-varying Wasserstein ambiguity sets that adapt to forecast dispersion and distributional shifts. This yields a tractable DR-MPC formulation that incorporates predictive distribution information directly into real-time decision making. The method is evaluated using real weather and market data from a Nordic case study across two seasonal scenarios. The results show that DR-MPC improves economic performance relative to standard forecast-based MPC when the ambiguity radius is chosen appropriately, with consistent gains of up to 0.8% for small radii across both seasonal scenarios. Larger radii become overly conservative and reduce revenue, underscoring the importance of proper radius selection. These findings demonstrate the practical value of distributionally robust optimization for uncertainty-aware VPP operation.

3D Gaussian Splatting (3DGS) has emerged as a prominent framework for real-time, photorealistic scene reconstruction, offering significant speed-ups over Neural Radiance Fields (NeRF). However, the fidelity of 3DGS representations remains heavily dependent on the quality of the initial point cloud. While standard Structure-from-Motion (SfM) pipelines using COLMAP provide adequate initialisation, they often suffer from high computational costs and sparsity in textureless regions, which degrades subsequent reconstruction accuracy and convergence speed. In this work, we introduce an AV1-based feature detection and matching pipeline that significantly reduces SfM processing overhead. By leveraging motion vectors inherent to the AV1 video codec, we bypass computationally expensive exhaustive matching while maintaining geometric robustness. Our pipeline produces substantially denser point clouds, with up to eight times as many points as classical SfM. We demonstrate that this enhanced initialisation directly improves 3DGS performance, yielding an 9-point increase in VMAF and a 63% average reduction in training time required to reach baseline quality. The project page: https://sigmedia.tv/AV1-3DGS.github.io/

This paper addresses the critical sensitivity issue of narrow-beam communication systems to physical misalignments and exploits the potential of Integrated Sensing and Communications (ISAC) technology to propose a sensor-free antenna tilt failure detection and estimation framework. The proposed methods utilize environmental static clutter as geometric anchors to monitor systematic gain shifts in clutter heat maps. The proposed methods are introduced for precise antenna tilt detection and estimation using the standard 5G NR frame structure and two different waveforms. Numerical results show the potential of the proposed framework to enable autonomous, self healing network maintenance without the need for external sensors.